изысканное звучание и полный набор необходимых функций для записи и воспроизведения аналогового звука
в прекрасной модели от LUXKIT в деревянном корпусе и идеальном состоянии

Model Control amplifier
Output voltage Rated 1V maximum 15V
Output Impedance pre out: 100 ohms rec out: 100 ohms
Total harmonic distortion 0.005% or less (3V, 20Hz ~ 20kHz)
Frequency characteristic 20Hz ~ 20kHz ± 0.2dB (pre out)
Input sensitivity :
Phono MC: 0.12MV, 0.2 mV, 0.07MV
Phono MM: 2 mV
Tunre, Aux, Monitor: 140 mV
Input impedance
Phono MC: 100 ohms, 10 ohms
Phono MM: 47kohm
Tuner, Aux, Monitor: 100K
SN ratio (IHF-A)
Phono MC: 70dB or more
Phono MM: 80dB or more
Tuner, Aux, Monitor: 100dB or more
Phono maximum permissible input (1kHz, RMS, standard)
MC: 16mV
MM: 270 mV
Tone control NF type, amount of change maximum ± 8dB
low frequency curved point Frequency: 150Hz, 300Hz, 600Hz
high-pass curved point Frequency: 1.5kHz, 3kHz, 6kHz
Auxiliary equipment Attenuator (-20 dB, normal, signal off)
Rec selector (Phono, Tuner, Aux, Tape1 → 2/2 → 1)
tone switch (in / defeat)
subsonic (in / Defeat, 15 Hz, -6 dB / OCT)
DC configuration headphone amplifier (8Ω, 100mWmax)
mode switch (reverse, normal, mono)
Power consumption 25W
External dimensions Width 438 × height 98 × depth 336mm
Weight 5.5kg

0684050405 / 0505516032