Power amplifier P11
Input Sensitivity: '100 W/8?, 1 V peak
Input Impedance: 20k?
Signal to Noise Ration (SNR) at rated output: 100 dBA
Intermodulation/Distortion: 0,1 %
RMS Output Power: stereo 2*100 W/ 8 ?, bridged 1*350 W7 8 ?
stand-by – 14 Watts,
normal operation – 225 Watts,
maximum operation – 625 Watts
Dimensions: W 19.5" * H3" * D 13"
Weight: 26 lbs
Load Impedance
The total impedance in bridged / mono operation of the P11 should not fall short of 4 Ј2. However, even with impedance way below of 4 Q, the PI 1 stays absolutely stable.
Preamplifier P2
Input res : Phono MC: 1kOhm; Phono MM: 47kOhm
Input sensetivities: High Level: 250mV; Phono MC: 0.15 mV; Phono MM: 2.5mV
Input capacities: Phono MC: 60pF; PHONO MM: 60pF
Output res.: 10OHm
max. out voltage: 10V, eff
Intermodulation/Distortion: 0,01 %
Intermodulation/Distortion from 250mV to rated output: 0.01%