(10-08-2012 19:29)Arenott писал(а): С EACом так ничего и не получилось. Теперь только копирую им, а записываю Burrrn.
Если Burrrn пишет, то проблема чисто софтовая.
(09-08-2012 09:12)Arenott писал(а): Ранее было ещё упоминание о CD-text. Сейчас нет уже.
Когда-то была такая проблема:
Цитата:"Problem: IDE-CD-Writer, DMA and CD-TEXT:
Unfortunately there have been several problems with IDE-CD-Writers, if DMA mode is activated and CD Text is to be written: On some systems the system crashes when writing the Lead-in.
The reasons for this are faulty IDE Busmaster drivers. To write CD Text, an "unusual" block size (96 bytes per sector) is used. It would appear that many busmaster drivers are unable to cope with this.
We have now tried to include a few "tricks" to transfer the data to the driver in a "more digestible" fashion. Please let us know if this has improved writing CD Text. It could of course also mean that these tricks make writing CD text not work on other systems - in this case please also send us a message!
Just to clarify the situation again: This is/was not an error in Feurio! - It is an error in many IDE Busmaster drivers which were probably only tested by the manufacturer with "usual" data block sizes - and still contain errors which only occur with "unusual" block sizes.
If writing CD text with active busmaster drive operation does not work with this version either, we can only continue to advise you to deactivate busmaster operation and to urge the vendor to finally correct the driver."
Т.е. софтовая проблема IDE Busmaster драйвера.
Цитата:It's the typical conflict between DMA and writing subchannels.
That's why I never install busmaster drivers unless it's necessary... Windows busmaster drivers usually work without problems and are as fast as the Intel/Via drivers.
В общем рекомендуют использовать стандартные виндовые драйвера, а не драйвера чипсета...
Попробуйте в "Диспетчере устройств" для "IDE ATA/ATAPI контроллеры" поставить для своего контроллера (Intel, VIA, SiS и т.д.) драйвер "Стандартный контроллер" либо просто снести его и пусть винда найдёт его наново...
