Помогите понять Кингву
Dear Sir,
The both TE8802 and USB32 can working in the NFB17.
The USB32 have around 10X times less jitter than the TE8802.
In sound the USB32 is more neutral, the TE8802 is slight emphasize on low and high freqency.
So which is best just depend on your sense.
Do you can solder?
Addition 4 resistors in the NFB17 can lower the output level.
See the photo, if you addition 4 pcs 2.2K ohm, the output can lower 50%.
Kingwa


在 2012-09-30 03:27:33， 写道：
>audio-gd писал 2012-09-23 03:17:
>> Dear Sir,
>> The USB32 have the 32bit 384K ability but the WM8741 limit only can
>> work highest on 192K.
>> The upgrade is available in near future once more users test the
>> USB32
>> if have not problems.
>> Kingwa
>>
>> At 2012-09-22 17:50:59, wrote:
>>>Good Morning! I see on the website with the NFB-17.32 32bit / 384K
>>>Asynchronous Transfer USB-32 Chip
>>>I have (as far as you remember 17.2) to me a bit confusing
>> description
>>>of the site, so I was not sure if I can use with 17.2 32bit / 384K,
>> and
>>>that's another model? Or I can be upgraded to the new version?
>>>Thank yo!!!!!
>
>Dear Sir
>You would not understand, I mean that I did not ES9018 ( i have 17.2,
>not NFB-17.32), and TE8802, so USB-32 is not there! How much worse
>TE8802, than ES9018? For example, to play 44/16. The second question! I
>have a CD player plays too loud! When I play with a PC or media player,
>I always use half the volume! Because it turns out very loudly on the
>amplifier, and the impression that the door is overweight! Like, if you
>really do on quieter anagolovyh RCA outputs and DAC?
>Wellcome)