(26-06-2011 23:45)Михайло писал(а): а у меня встречный вопрос - как с РОКа 160 снимается замок шелла? я пока так и не смог (но не сильно и пытался)
Чытая Шекспира наткнувся
------------cut here----------
Rewiring my arm was a combination of brute force & ignorance I'm afraid.
At the headshell end of the arm, the internal connections are mounted in a plastic/rubber disc, which is a tight push fit into the arm tube. On my arm this disc had been pushed deep into the tube, preventing the headshell pins from making contact.
To push the the disc forward and out of the tube I used a thin knitting needle, which was flexible enough to follow the curve or the arm (note there is another disc at the back of the arm tube, presumably for damping purposes - I just pushed past this).
There was no need to undo any screws.
Good luck with your rewire.
------------cut here----------
Vid sebe dobavljiu - jia prosto prosverdlyv v trubi dyrku taji protiag novi droty bo vyphaty zamok ne zmig.
Ну, если так рассуждать, то можно дойти до вот такого:
