MC-картридж, производящийся по спецификации фирмы Scheu, компанией Benz micro. Имеет Fritz-Gyger-S шлифовку и изготавливается вручную. Уровень выхода: примерно 0,30 mV, серебряная катушка.

System type: Moving Coil
Cantilever: Solid boron rod, 0.28 mm diameter
Stylus: Nude line-contact diamond, mirror polished
Stylus tip radius: 3 x 60 μm
Vertical tracking angle (VTA): 20 degrees
Coil: Pure iron cross
Weight: 8,8 gr

Output voltage: ca. 0.4 mV @ 3.54 cm/s
Internal impedance: ca. 12 ohms
Frequency response: 20Hz – 20kHz +/- 1 dB
Channel balance: < 0.5dB
Channel separation: > 35 dB @ 1 kHz
Tracking ability: at 315 Hz at a tracking force of 2 grams: 80 µm
Dynamic compliance: 15 µm/mN

Recommended loading: 100 – 47.000 Ohm
Recommended tracking force: 1.7 – 2.0 gr
Optimum tracking force: 1.7 – 1.8 gr
Recommended tonearm mass: Medium to high
Optimum working temperature:23° C
Break-in period: 40 hours